Equipment for aqua cleaning has many advantages over dry cleaning equipment:
- environmentally friendly (can be placed even in residential buildings)
- small area
- ease of operation
- low cost
- ease of maintenance
Necessary equipment:
1. High-speed industrial washing machine , with microprocessor control and a reagent dosing system (DANUBE washing machines with a load of 13/16/18/25 kg of dry laundry).
2. Drying machine with microprocessor control, reverse and residual moisture sensor (DANUBE drying machines with a load capacity of 12/16/18/23 kg of dry laundry).
3. Finishing equipment (ironing table, steam dummy, press, etc.)
Unlike conventional industrial washing machines, wet cleaning machines use special programs that allow the most sensitive materials, including leather and suede, to be treated in an aquatic environment. Features of these programs: products are processed in the most gentle mode; the rotation speed of the drum is half as low as when processing products of the usual range; during rotation, sudden changes in speed are completely eliminated; the residual water content on products after cleaning is minimized; cycle time, including cleaning and drying – no more than 1 hour. Machines equipped with a freely programmable microprocessor can be successfully used for water cleaning. The machines must also be equipped with an automatic chemical dispenser, which allows for accurate dosage of drugs on time.
Drying modes in drying drums are also adapted to the peculiarities of processing “delicate” materials. Drying programs include: reverse rotation; strict control of residual humidity and air flow temperature during the drying process; Drying time is minimal, residual moisture at the end of the process is 10-12%, depending on the type of material.
Industrial washing machine DANUBE WED 13
High-speed with a freely programmable microprocessor
Nominal load:
loading factor 1:10 (normal wash) - 13 kg
loading factor 1:20 (wet cleaning) - 6.5 kg
Overall dimensions: 788x870x1300 mm
Drum volume: 130 l, spin - 1000 rpm
Heating: electric or steam
Noise level: 60 dB
Technical features of the machine:
- Control: freely programmable microprocessor (84 free programs + 16 standard)
- Enlarged loading hatch
- Adjustable engine speed using an inverter
- Body, inner and outer drums - high quality stainless steel
- Low noise level
- It is possible to connect a liquid detergent dispenser
*** With a simple change of program, your wet cleaning machine becomes an economical washing machine for wide use.
Drying machine DANUBE TD 10
Nominal load:
Normal drying - 12 kg
Water cleaning - 6 kg
Overall dimensions: 785x857x1665 mm
Drum volume: 210 l, spin - 1000 rpm.
Heating: electric, gas or steam
Noise level: 64 dB
Technical features of the machine:
- Control: microprocessor
- Enlarged loading hatch
- Drum – high quality stainless steel AISI 304
- Reverse installed
- New filter design
- Cooling: Anti-crease system
- Emergency stop
Finishing equipment (ironing table, steam dummy, press , etc.)
Vacuum ironing table EUROPA with blowing, and a double pedal system on the left and right (except for models with a rectangular surface), with electric heating. The surface height is fixed at 90cm. With built-in steam generator (or without). With instant steam and vacuum via the steam iron switch. Electric steam iron.
Steam mannequin for outerwear Mistral (Models 30A, 30V, 31V)
Autonomous steam mannequin with or without a built-in steam generator (9 l; 7.5 kW). Fan 0.75 kW. Timer programmable via electronic panel. Equipped with stretchers and clamps.
